MEPS NEONCORE F405 60A FPV drone stack adopts dual design of plug-in port and reserved solder pad, support zero soldering installation. 60A ESC with full three-proof coating & CNC aluminum heat sink, pre-calibrated PID for ready-to-fly. Perfect for beginner or experienced pilots, freestyle 5-inch FPV drone, stable performance under 6S battery, no motor out of step. Optimized layout for most mainstream drone frames.
In Stock
Expected ship within 48 hours after order.
Free Shipping Over $99 | Save on Orders $99+
24-Month Warranty | 2 Years Full Protection
30-Day Returns From Shipment | 7-Day No-Reason Returns
24h Support Response | 24h Fast Support Guarantee
Top highlights
60A Heavy-Duty: Thickened copper layers support true 60A continuous / 80A burst power for demanding 6S freestyle flights.
CNC Armor Cooling: Full-wrap aluminum shell prevents crash damage and eliminates motor desyncs with superior heat dissipation.
Pre-Waterproofed: Factory-applied conformal coating protects against wet grass, dew, and splashes.
Dual-Mode Setup: Built-in DJI digital air unit connector, supporting solderless Plug & Play and traditional solder pad wiring, with direct receiver plug for easier installation.
Ready-to-Fly: Pre-tuned mainstream 5-inch builds PIDs deliver a smooth, locked-in flight straight out of the box—no tuning required.
Payment | Every order you place with us is safe & secure
Share
Copy
Description
FAQ
Step Up to Real 60A Performance
The MEPS Hypercore stack provides a ferocious, heavy-duty all-in-one flight and power system. It supports a massive 3S–8S LiPo input with a true 60A continuous and 80A peak output, effortlessly driving high-power motors. Built with premium MOSFETs and thick internal copper layers, it delivers an incredibly smooth, stable, and desync-free performance even under aggressive full-throttle punches and demanding freestyle flights.
Locked-in Precision for High-Speed Freestyle
Powered by a high-performance STM32F405 MCU paired with the ultra-clear ICM42688P IMU, this stack delivers laser-sharp gyro telemetry and lightning-fast processing speeds. Its heavy-duty core ensures zero latency, rock-solid filtering, and locked-in control during aggressive freestyle maneuvers and tight cinematic flow.
Heavy-Duty Protection & Thermal Stability
Stop worrying about destroying delicate components during high-impact drops. The MEPS Hypercore features a full-wrap CNC aluminum alloy armor that acts as a bulletproof vest against direct structural impacts and flying debris.
Beyond pure physical defense, this heavy-duty shell serves as a high-efficiency cooling pad. By keeping critical MOSFETs ice-cold under continuous heavy loads, it maintains rock-solid voltage/current telemetry accuracy and completely eliminates motor desyncs. Power through demanding flights—your power loop is fully guarded.
Factory Pre-Waterproofed: Shield Against the Elements
Skip the messy chore of brushing on your own silicone protection. The MEPS Hypercore ESC comes completely factory pre-treated with premium industrial-grade waterproofing. This full-coverage insulative barrier shields your sensitive electronic components against morning dew, wet grass, fog, and unexpected splashes. Keep your focus entirely on the sticks—damp environments won't compromise your flight.
Stop Tweakng, Start Ripping
Forget the frustration of endless Betaflight slider adjustments and blackbox log analysis. The MEPS Hypercore arrives with a mature, masterfully optimized stock PID profile right out of the box.
Backed by thousands of hours of real-world testing, this stack is engineered to provide a smooth, responsive, and "locked-in" authority for 5-inch rigs. Experience lightning-fast stick response and flawless filtering without ever picking up a USB cable. Just power on and dominate the air instantly.
Your Build, Your Choice
Whether you are a beginner looking for a hassle-free setup or a seasoned pilot who demands a custom wired layout, this stack adapts to your building style.
Solder-Free Plug & Play: The stack comes with a built-in DJI digital air unit and HD FPV interface, along with direct receiver plug support, enabling a solder-free setup for faster assembly and cleaner wiring.
Anti-Bridge Traditional Pads: Prefer traditional welding? We've got you covered. The reserved motor and power pads feature oversized spacing and physical isolation, making soldering effortless and completely eliminating the risk of accidental solder bridges.
F405 Flight Controller Wiring Diagram
⚠️Installation & Setup Guide (Must-Read):
1. Verify Wiring Pinouts Strictly： The ESC and O3/O4 Air Unit cables on this stack feature a redundant multi-pin design, which differs from standard standard pinouts. Always cross-check the wire sequence (pin-to-pin) before plugging them in. DO NOT plug them in blindly, or you risk burning out your Air Unit or Flight Controller.
2.Add Stack Spacers for Clearance: Due to the thick metal heatsink, the FC bottom components may physically interfere with the ESC armor. You MUST install the included spacers or nylon nuts between the ESC and FC to ensure enough clearance and vibration dampening space.
3. Configure Refresh Rate (Prevent Crashing): The F405 MCU has limited processing power. If you enable Bidirectional DSHOT (RPM Filtering), please set your PID loop/gyro refresh rate to 8K/4K or 4K/4K. DO NOT run at dual 8K, as overloading the CPU can cause mid-air freezes or random reboots.
4. Motor Direction Adjustment: If you cannot change the motor direction in Betaflight Configurator after enabling Bidirectional DSHOT, go to the CLI tab, type: set dshot_bitbang = AUTO and press Enter, then type save. Alternatively, temporarily disable Bidirectional DSHOT, change the motor direction, and re-enable it.
MEPS NEONCORE F405 60A Stack Review
Real Flight Performance: Smooth Control With Reliable Power Output
During real flight testing, the NEONCORE F405 60A Stack delivered a smooth and precise flight experience in both freestyle and cinematic flying.
The combination of the F405 flight controller and 60A ESC provided stable control response during fast direction changes, high-speed movements, and aggressive throttle inputs.
For freestyle pilots, maximum power is only part of the equation. A good stack needs to maintain consistent performance when the drone is repeatedly pushed through punch-outs, dives, and rapid recoveries.
In testing, the stack handled repeated high-throttle flights without noticeable performance loss, making it a reliable choice for pilots building a powerful 5-inch quad.
60A ESC Stress Test: Designed for High-Load 5-Inch Builds
A 5-inch FPV drone can generate significant current spikes during aggressive maneuvers. This is especially true when using higher KV motors with 6S batteries.
The NEONCORE 60A ESC was tested with multiple full-throttle runs lasting several seconds under warm outdoor conditions. The ESC remained stable, while the motors maintained reasonable operating temperatures.
The improved ESC design includes:
- High-quality MOSFETs for efficient power handling
- Reinforced copper pads for better durability
- Dedicated heatsink design for improved heat dissipation
- Protective coating for additional resistance against moisture and light splashes.
The coating does not make the ESC waterproof, but it provides extra protection for outdoor FPV flying where humidity or occasional water exposure may occur.
Recommended Motor and Battery Setup
The MEPS NEONCORE F405 60A Stack is designed for 5-inch freestyle and cinematic FPV builds. Choosing the right motor KV and battery voltage helps achieve the best balance between power, efficiency, and flight performance.
This setup is ideal for most 5-inch freestyle pilots, offering smooth throttle response, strong acceleration, and stable motor temperatures. A 1750KV motor with a 6S battery is a popular combination for balanced performance.
High-Performance Setup
-Motor: 2207 / 2306 High-KV Motor
-KV: 1900KV–1950KV
-Battery: 6S High C-Rating LiPo
Recommended for experienced pilots who prefer faster response and aggressive freestyle flying. Higher KV motors provide more power but require quality batteries and proper heat management.
