Q: What type of drone is this ESC designed for?

A: It is designed for 3–5 inch FPV drones, especially compact freestyle and racing builds using 20×20 stacks.

Q: What makes this ESC different from standard 30×30 ESCs?

A: It offers similar power (55A) in a smaller 20×20 form factor, reducing weight and saving space.

Q: Is 55A enough for 5-inch FPV drones?

A: Yes, 55A is more than sufficient for most 5-inch freestyle and racing builds.

Q: What battery voltage does it support?

A: It supports 2S to 6S LiPo batteries, offering flexibility from lightweight to high-performance setups.

Q: Is this ESC beginner-friendly?

A: It’s better suited for intermediate users due to compact wiring and higher performance tuning requirements.

Q: What firmware does it use?

A: It runs BLHeli32 firmware with telemetry support for advanced tuning and monitoring.

Q: Does it support telemetry and current sensing?

A: Yes, it includes a built-in current sensor and telemetry for accurate power tracking.

Q: What mounting size does it use?

A: It uses a 20×20mm mounting pattern, ideal for mini stacks and lightweight builds.

Q: Does it include a BEC?

A: No, it does not include a BEC, so power must come from the flight controller.

Q: Can it handle aggressive freestyle flying?

A: Yes, it is built for high current bursts and responsive throttle control in freestyle and racing.

Q: Will it overheat in compact builds?

A: It performs well, but proper airflow and clean mounting are important due to the compact size.

Q: What motors work best with this ESC?

A: It pairs well with 2004, 2205, 2207 motors on 4S–6S setups.

Q: What are common setup mistakes?

A: Avoid poor soldering, tight stack spacing without airflow, and mismatched motor/prop combinations.

Q: Who is this ESC best for?

A: Pilots building compact, high-performance FPV drones who want strong power in a lightweight setup.

New

iFlight BLITZ Mini E55 4-IN-1 ESC 2-6S 55A for FPV

iFlight

$30 Off Orders $499+

$15 Off Orders $249+

Collect

$ 82.99 ~~$99.99~~

-17%

4.5 | 108Sold

Options (1)

Quantity

In Stock Expected ship within 5 days after order.

Free Shipping Over $79 | Save on Orders $79+
24-Month Warranty | 2 Years Full Protection
30-Day Returns From Shipment | 7-Day No-Reason Returns
24h Support Response | 24h Fast Support Guarantee

Top highlights

2–6S LiPo compatible with 55A continuous output for high-performance FPV racing and freestyle builds
BLHeli32 firmware with telemetry for precise throttle control and real-time feedback
Compact 20×20mm mounting layout with lightweight 4-in-1 integrated design
Supports DShot, MultiShot and OneShot protocols for broad flight controller compatibility
Built-in current sensor for accurate power tracking and optimized flight tuning

Payment | Every order you place with us is safe & secure

Specifications:

Product Name: BLITZ Mini E55 4-IN-1 ESC

Input Voltage: 2-6S

Max. Continuous Current: 55A

Max. Burst Current: 65A

MCU: G071

BEC: No

Firmware: BLHeli32

Current Sensor: Yes

Telemetry: Supported

Target: IFLIGHT_BLITZ_G071_01 32.9

Mounting Dimensions: 20 x20 mm/Φ4mm

Dimensions: 35x42mm

Weight: 11.3g

Protocol: Supports DShot DShot150/300/600/MultiShot/ OneShot etc

iflight blitz mini e55 4 in 1 esc 2 6s 55a for fpv pc 1

iflight blitz mini e55 4 in 1 esc 2 6s 55a for fpv pc 2

Packing List:

1 x BLITZ Mini E55 4-IN-1 2-6S ESC

1 x Power cables & ESC signal wires

Note:

If you need to use the ESC in the iH3 O3 Frame kit, please remove the capacitor after receiving the ESC, and then install the ESC.

Buying Guide: iFlight BLITZ Mini E55 4-IN-1 ESC

A 20 × 20mm ESC for Pilots Who Want Full 5-Inch Power in a Mini Stack

Choosing a 4-in-1 ESC is about more than selecting the highest current rating. For a compact FPV build, the ESC must fit the frame, handle the battery voltage and motor load, provide reliable telemetry, and leave enough room for wiring, a capacitor, and cooling airflow.

The iFlight BLITZ Mini E55 4-IN-1 ESC is designed for pilots who want a compact 20 × 20mm ESC without stepping down to a low-current micro build. It supports 2–6S LiPo, delivers a rated 55A continuous current per channel, includes current sensing and telemetry, and uses a 32-bit G071 MCU with BLHeli_32 firmware.

This makes it a practical power-system choice for lightweight 3-inch builds, high-performance 4-inch quads, and many compact 5-inch freestyle or racing drones.

What FPV Pilots Say About the iFlight BLITZ Mini E55

For pilots building compact 3-inch to 5-inch quads, the Mini E55 is often appreciated because it delivers a 55A rating in a 20 × 20mm format. The most common positive feedback is that it feels like a full-power ESC without forcing builders to use a larger 30.5 × 30.5mm stack.

Pilots using it in 4S and 6S freestyle builds frequently mention responsive throttle feel, stable operation during punch-outs, and useful ESC telemetry for checking current draw and tuning the setup. Its solder pads are also generally regarded as clean and practical for a mini ESC, although the smaller stack format still requires careful wire management.

A typical pilot impression is that the Mini E55 works especially well when paired with the iFlight BLITZ Mini F7 V1.2 Flight Controller in a compact 5-inch frame: the stack keeps the center section tidy while retaining enough current headroom for 2207-class motors and aggressive 6S freestyle flying.

Recommended iFlight BLITZ Mini E55 Build Combo

● Flight Controller: iFlight BLITZ Mini F7 V1.2 Flight Controller — matching 20 × 20mm F7 FC with six UARTs and DJI HD VTX connector.

● Stack Alternative: iFlight BLITZ Mini F722 E55S 4-in-1 Stack — a matched Mini F7 and 55A ESC combination.

● Motors: T-HOBBY Velox V2207 V3.0 1750KV motors — a suitable 6S choice for a compact 5-inch freestyle build.

● Propellers: MEPS SZ5145 3-blade FPV propellers — a practical starting prop for 2207 motor setups.

● Receiver: RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver — compact serial receiver for a 20 × 20mm build.

● Digital video: CaddxFPV Walksnail Moonlight Kit — HD video option; verify voltage and UART wiring before installation.

● Battery: Boslipo P7 Version 1600mAh 150C 6S Battery — suitable for a 6S 5-inch freestyle configuration.

Why Choose the iFlight BLITZ Mini E55?

Choose the iFlight BLITZ Mini E55 4-IN-1 ESC if you want:

● A compact 20 × 20mm ESC for a tight FPV frame

● 55A continuous current for demanding 4S or 6S builds

● Current sensing and ESC telemetry

● Support for common modern ESC protocols, including DShot600

● A direct pairing with the iFlight BLITZ Mini F7 V1.2 FC

● A compact 3-inch to 5-inch freestyle or racing power system

It is best suited to builders who need strong current capability but cannot accommodate a larger 30.5 × 30.5mm ESC.

When Should You Choose the Full-Size iFlight BLITZ E55 Instead?

The iFlight BLITZ E55 55A 2–6S 4-in-1 ESC is the better alternative for frames designed around a standard 30.5 × 30.5mm stack.

It has the same core 55A continuous rating, 2–6S input range, G071 MCU, current sensing, telemetry, and protocol support. Its larger mounting format is generally easier to work with in a standard 5-inch frame and offers more physical space around the stack for wiring and component layout.

Choose the Mini E55 when frame space and stack weight are the priorities.

Choose the full-size E55 when your frame supports 30.5 × 30.5mm electronics and you prefer a less constrained installation.

iFlight BLITZ Mini E55 vs iFlight BLITZ E55

Technical Specification	iFlight BLITZ Mini E55 4-IN-1 ESC	iFlight BLITZ E55 55A 2–6S 4-in-1 ESC
Primary use	Compact 3–5 inch FPV builds	Standard 5-inch and larger-frame FPV builds
ESC type	4-in-1	4-in-1
MCU	G071, 32-bit	G071, 32-bit
Firmware	BLHeli_32	BLHeli_32
Input voltage	2–6S LiPo	2–6S LiPo
Continuous current	55A per channel	55A per channel
Burst current	65A	65A
Current sensor	Yes	Yes
ESC telemetry	Supported	Supported
Onboard BEC	No	No
Signal protocols	DShot150/300/600, MultiShot, OneShot	DShot150/300/600, MultiShot, OneShot
Mounting pattern	20 × 20mm, M3	30.5 × 30.5mm, M3
Dimensions	35 × 42mm	Approx. 45 × 45mm
Weight	Approx. 11.3g	Approx. 15.3g
Best for	Pilots needing 55A performance in a mini stack	Pilots wanting the same power rating in a larger, easier-to-install stack

Recommended Parts

● MEPS NEON 2306 V2 High-Efficiency Brushless Motor for 5'' Freestyle FPV Drone

● MEPS NEON 2207 V2 Brushless Motor Powerful Thrust Crash‑Resistant for 5'' Freestyle FPV Drone

● MEPS NEON COOL 2207 High-Efficiency CW/CCW Brushless Motor for 5'' FPV

● MEPS NEON COOL 2306 1950KV High-Efficiency CW/CCW Brushless Motor for 5'' FPV

● MEPS NEON 2207 5 inch FPV Drone Brushless Motors 1950KV/2050KV/2550KV

● MEPS NEON 2306 Quad Motor for 5'' Freestyle FPV Drone 1950KV/2050KV/2550KV

● MEPS SZ2207 V2 FPV Motor – Smooth Linear Power & Stable Thrust | 1750KV/1950KV/2750KV for 5'' Racing Drones

● MEPS SZ2306 V2 Motor for 5 Inch Freestyle Drone 1750KV/1950KV/2450KV

Recommendation：

More Expert Advice

Best FPV Stack for Your FPV Drone

20×20 Flight Controller Stack Review:MEPS vs SpeedyBee vs T-Motor

Flight Controller Not Connecting to Betaflight? Complete Troubleshooting Guide (2026)

Reviews

p**********1
Verified

Best 20x20 ESC I've used.

Specification：Mini E55 ESC

Purchased 5 times
d********r
Verified

Parfait pour mon Nazgul. La réponse à la gaz est ultra précise et les télémétries fonctionnent bien. C'est un must-have pour les builds compacts.

Specification：Mini E55 ESC

Purchased 2 times
s************k
Verified

Plugged it into my stack and it worked out of the box. DShot1200 is flawless. This thing handles 55A like a champ.

Specification：Mini E55 ESC

Purchased 4 times
v**************e
Verified

Sehr solide ESC für den Preis. Läuft auf 6S absolut stabil, keine Desyncs bisher. Die Verarbeitung ist top, besonders die Kondensatoren.

Specification：Mini E55 ESC

Purchased 2 times
t**********r
Verified

Just installed this ESC on my 5" freestyle build. The 20x20 form factor is perfect for mini stacks. Solder pads are huge and easy to work with. Performance is buttery smooth with BLHeli32.

Specification：Mini E55 ESC

Purchased 3 times
B*********E
Verified

Very clean ESC with solid performance across 4S and 6S builds. Solder pads are well designed and make installation straightforward. No desync issues so far.

Specification：Mini E55 ESC

Purchased 2 times
c**************y
Verified

Had a small issue with a motor wire after a crash, but support was super helpful and guided me through the fix. ESC itself is solid and powerful.

Specification：Mini E55 ESC

Purchased 2 times
b**************r
Verified

Good ESC, but the wiring diagram was a bit hard to find on the site. Support helped me out quickly though, they sent me the pinout. Great service.

Specification：Mini E55 ESC

FAQ Feel free to ask us any questions

Q: What type of drone is this ESC designed for?: A: It is designed for 3–5 inch FPV drones, especially compact freestyle and racing builds using 20×20 stacks.
Q: What makes this ESC different from standard 30×30 ESCs?: A: It offers similar power (55A) in a smaller 20×20 form factor, reducing weight and saving space.
Q: Is 55A enough for 5-inch FPV drones?: A: Yes, 55A is more than sufficient for most 5-inch freestyle and racing builds.
Q: What battery voltage does it support?: A: It supports 2S to 6S LiPo batteries, offering flexibility from lightweight to high-performance setups.
Q: Is this ESC beginner-friendly?: A: It’s better suited for intermediate users due to compact wiring and higher performance tuning requirements.