Goosky S2 3S 750mAh 45C LiPo Battery Buying Guide
Why Choose the Goosky S2 750mAh Battery?
The Goosky S2 11.1V 3S 750mAh 45C LiPo Battery is a replacement battery designed specifically for the GooSky S2 RC helicopter. It combines a compact 3S1P configuration, 750mAh capacity, 45C continuous discharge rating and XT30 connector in a battery size designed to fit the S2 platform.
Unlike general-purpose FPV batteries, this pack is primarily about direct compatibility and reliable replacement. For S2 owners, matching the voltage, physical dimensions, connector and capacity is more important than simply choosing a battery with a higher C rating or larger capacity.
750mAh Capacity: Balance Between Weight and Flight Time
A 750mAh capacity is selected to match the S2's power system and overall weight requirements.
A larger battery does not automatically provide better flight performance. Increasing capacity also increases battery weight, which can affect helicopter response, power consumption and handling.
The Goosky S2 manual specifications list the aircraft at approximately 345g takeoff weight with an 11.1V 750mAh 45C battery, making the 750mAh capacity part of the intended S2 setup.
For S2 pilots, staying with the specified 750mAh capacity is therefore a more practical approach than simply choosing the largest battery that can physically fit.
Understanding the 45C Rating
The battery has a 45C continuous discharge rating.
A simple theoretical calculation gives:
750mAh × 45C = 33.75A
This represents the nominal continuous-current capability indicated by the C-rating. Actual usable current depends on battery condition, temperature, wiring, connector resistance and the helicopter's power system.
The important point is that the 45C rating provides sufficient discharge capability for the intended S2 application without requiring a much larger or heavier battery.
XT30 Connector and XH Balance Plug
The battery uses an XT30 main discharge connector and an XH balance connector.
| Connector | Function |
|---|
| XT30 | Main power connection |
| XH | Cell balancing during charging |
The XT30 keeps the power connection compact while providing a common connector format for small RC power systems.
Before purchasing a replacement battery, always verify both the main connector and balance connector. Matching the connector alone is not enough if the battery voltage or physical dimensions are different.
Is This Battery Suitable for Other FPV Models?
Although the battery uses an XT30 connector, it should not be treated as a universal 3S FPV battery.
The correct battery selection depends on more than the connector:
| Requirement | Must Match? |
|---|
| Voltage / Cell Count | Yes |
| Connector | Yes |
| Physical Dimensions | Yes |
| Capacity | Should Match Recommended Range |
| Discharge Capability | Must Meet System Demand |
| Balance Connector | Yes for Balance Charging |
A different 3S aircraft may technically accept 11.1V, but that does not mean a 750mAh battery with these dimensions and connector will fit or provide the appropriate performance.
For this reason, the Goosky S2 compatibility is the primary selling point rather than general FPV compatibility.
Replacement or Extra Flight Battery?
| Use Case | Benefit |
|---|
| Replacement Battery | Restore the original S2 battery configuration |
| Extra Flight Pack | Carry additional packs for longer flying sessions |
| Training Sessions | Swap batteries instead of waiting for one pack to recharge |
| Battery Rotation | Reduce downtime between flights |
Goosky's S2 documentation indicates an approximate flight time of 10 minutes and charging time of approximately 20 minutes, so having additional compatible batteries can be useful for pilots who want to continue flying while another pack is being charged.
Final Recommendation
The Goosky S2 11.1V 3S 750mAh 45C LiPo Battery is primarily a model-specific replacement and spare battery for the Goosky S2 helicopter.
Its 11.1V 3S configuration, 750mAh capacity, 45C discharge rating, XT30 connector and approximately 60 × 24 × 24mm dimensions are designed around the S2 platform.
For S2 owners, the selection rule is simple:
Match the 3S voltage → match the 750mAh capacity → confirm XT30 → confirm the physical fit.
If you already own a Goosky S2 and need either a replacement battery or an additional flight pack, this battery is a direct and practical choice.
T-HOBBY M1103 FPV Micro Motor for whoop & toothpick drone8000KV$10.95 Save $0.95
Happymodel CrazyF405 HD ELRS 12A 1-2S AIO Flight Controller Built-in ELRS 2.4GHz Receiver and BLHELI_S 4-in-1 ESCCrazyF405HD 12A AIO$65.79 Save $4.20
