iflight blitz f7 stack e55s 4in1 esc
iflight blitz f7 stack e55s 4in1 esc
iflight blitz f7 stack e55s stack
iflight blitz f7 stack e55s
iflight blitz f7 stack e55s flight controller
iflight blitz f7 e55s stack
New

iFlight BLITZ F7 Stack E55S Flight Controller

$18 Off Orders $249+
$12 Off Orders $159+
Collect
$ 108.00
5 | 8Sold
Options (1)
iflight blitz f7 stack e55s 4in1 esc
BLITZ F7 E55S Stack
Quantity
Add-ons
Bundle and save up to $2.45 on gear — upgrade your setup for less.
tattu r line 6 1480mah 4
Tattu R-Line Version 6.0 1480mAh 160C 6S 22.2V SQ Lipo Battery Pack with XT60 Plug
1480mAh 6S 160C 22.2V SQ
$46.54 Save $2.45
pc lipo
In Stock Expected ship within 5 days after order.
Free Shipping Over $99 | Save on Orders $99+
24-Month Warranty | 2 Years Full Protection
30-Day Returns From Shipment | 7-Day No-Reason Returns
24h Support Response | 24h Fast Support Guarantee
Top highlights
Powered by STM32F722 for fast response and smooth, precise FPV control.
55A continuous / 65A burst ESC supports 2–6S setups with stable performance.
Optimized circuit design with LC filter reduces noise for more stable gyro data.
Built-in connectors for DJI HD system and multiple UARTs for easy installation.
ICM42688 gyro + DPS310 barometer for improved flight stability and tuning accuracy.
Payment | Every order you place with us is safe & secure
Share
Copy

FC Features

Improved circuit design, better components and lower electrical noise!

DJI HD VTX Connector (Plug-and-Play / No soldering required)

FC indicator LEDs for visual debugging

With LC filter

FC Specifications

MCU: STM32F722

Gyro: ICM42688

Barometer: DPS310

OSD Chip: AT7456E

Flash: 32MB (Blackbox flash)

UARTS: 6

Motor outputs: 4x (SH1.0 connector)

I2C serial: SDA / SLA pads

Smartaudio / IRC Tramp VTX protocol supported

LED controller: Yes

Beeper pad: Yes

Firmware target: IFRC-IFLIGHT_BLITZ_F722

Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter

Dimensions: 36.5*35 mm

Weight: 7.8g

BEC: 5V 2.5A / 9V 2A

Wiring Suggestion

UART 1 for VTX HD / Analog

UART 2 for a Receiver

UART 3/4/5 for GPS or other sensors that require a serial port

UART 6 for ESC Telemetry

ESC Specifications

Mounting Holes: 30.5*30.5mm/Φ4mm

Weight: 14.7g

Supports 2-6S lipo input

MCU: BB21

Constant: 55 Amps 

Burst: 65 Amps

Current sensor: Yes

BEC: No

Current rate: 200

Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

Target:   Q-H-25 16.7(BlheliS) / Bluejay Q-H-25 (Bluejay)

Packing List

1 x BLITZ F7 V1.2 Flight Controller

1 x BLITZ E55S 4-IN-1 45A 2-6S ESC

1 x Screw Bag

Recommendations

Reviews
  • F*****r
    Verified
    Strong ESC output with excellent thermal handling. Works smoothly on 6S without overheating.
    BLITZ F7 Stack (E55S 4-IN-1ESC):BLITZ F7 E55S Stack
  • D**********r
    Verified
    Good overall performance but slight EMI noise detected. Requires proper tuning for best results.
    BLITZ F7 Stack (E55S 4-IN-1ESC):BLITZ F7 E55S Stack
  • V**********r
    Verified
    The unit wase flashed and configured properly.
    BLITZ F7 Stack (E55S 4-IN-1ESC):BLITZ F7 E55S Stack
  • H*******h
    Verified
    Very reliable stack with strong balance between performance and safety. No issues so far.
    BLITZ F7 Stack (E55S 4-IN-1ESC):BLITZ F7 E55S Stack
  • W**********w
    Verified
    Extremely fast response and stable flight performance. Perfect for freestyle and racing builds.
    BLITZ F7 Stack (E55S 4-IN-1ESC):BLITZ F7 E55S Stack
  • F*********Z
    Verified
    Good compatibility with DJI system and clean installation process. Slight tuning needed.
    BLITZ F7 Stack (E55S 4-IN-1ESC):BLITZ F7 E55S Stack
  • s******l
    Verified
    The stack arrived well packaged and everything works perfectly. Build quality feels premium and reliable.
    BLITZ F7 Stack (E55S 4-IN-1ESC):BLITZ F7 E55S Stack
  • R*******e
    Verified
    Excellent power delivery and stable response even under aggressive throttle inputs.
    BLITZ F7 Stack (E55S 4-IN-1ESC):BLITZ F7 E55S Stack
  • 1
  • 2
FAQ Feel free to ask us any questions
ASK A QUESTION
MORE
You may also like