Tattu R-Line Version 5.0 1400mAh 6S 150C 22.2V Lipo Battery Pack with XT60 Plug

Check out our 6S Batteries, all FPV Batteries Collection and the rest of our Tattu Products!

What Has Improved?

● First use of X technology Al Boehmite

● Highly consistent and continuous power output

● Less decrease in performance after cycles

● Higher discharge platform

● Resistance to dropping

What Tattu Pilots Say:

● Corey Tapp: Super long flight times with the 6s 1400s.

● DarKex Killian Rousseau: The voltage drop IS still very good like 20.5 or 21v while I'm flying.

● Jake Capobres: The 1200 is the best battery I have flown. It had really good power for it's weight. It hold voltage very constant as well.

● Thomas Bitmatta: Its ~3% more speed per lap! anything 3% or higher is something that can be felt comfortably without data, its good!!

● Lukáš Košata: I am really impressed with the performance, there is almost no voltage sag.

● TERRY ARSCOTT: We were flying in 35deg temperature charging outside and still got no battery sag. The biggest difference is how long it holds voltage for. I didn't feel a drop in power until the battery was almost dead.

● Walter Kirsch: From my reading in the FPV Goggles I could tell, that the v5 was having less voltage drop. After 3, 5, 10 and even 20 full cycles now I cannot tell a difference between a new v5 and a used one. I did test a 20 cycle old vs.

Features

● High quality, reliable power

● Stable automatic stacking technology enables single-cell capacities of 1400mAh

● Higher capacity than comparable size packs

● Very high C rate. Designed for professional FPV racing

● No memory effect.

● Local after-sales service(located in Dublin, CA)

Tattu R-Line V5 1400mAh 6S Buying Guide

Choosing an FPV battery comes down to three things: voltage, capacity, and weight. For 5-inch 6S racing and freestyle, the Tattu R-Line V5 1400mAh offers a performance-focused balance between high power output and manageable weight.

Is 1400mAh Right for Your FPV Drone?

The 1400mAh 6S capacity is a good choice when you want strong acceleration without adding unnecessary battery weight.

Choose 1400mAh if you mainly fly 5-inch racing or aggressive freestyle and care more about responsiveness and power-to-weight ratio than maximum flight time.

Why Choose R-Line V5 150C?

The R-Line V5 is designed for high-current FPV applications. Its 150C discharge rating and low internal resistance help reduce voltage sag during aggressive throttle inputs.

In practice, this means:

-Stronger punch-outs

-More consistent throttle response

-Less noticeable voltage sag

-More stable power toward the end of the flight

Independent testing of the R-Line V5 also found very low voltage sag during aggressive throttle use and strong power delivery throughout the flight.

6S Compatibility Checklist

Before buying, make sure your FPV power system supports 6S / 22.2V.

Check:

-ESC: 6S rated

-Motor: Suitable for 6S

-Motor KV: Matched to your propeller

-Charger: Supports 6S LiPo

-Frame: Fits the approximately 222g battery

-Connector: XT60

For a typical 5-inch 6S build, 1750–1950KV motors are a good starting point for this battery.

1400mAh or 1480mAh?

The difference is simple:

-Choose 1400mAh for a lighter, more responsive racing setup.

-Choose 1480mAh when you want slightly more capacity while maintaining a performance-oriented 6S setup.

If your priority is fast response, strong punch, and low battery weight, the Tattu R-Line V5 1400mAh 6S is the better choice.

Specifications

● Minimum Capacity: 1400mAh

● Configuration: 6S1P / 22.2V / 6 Cells

● Discharge Rate: 150C

● Max Burst Discharge Rate: 260C

● Net Weight(±20g): 222g

● Dimensions:78mm x 39mm x 42mm (L x W x H)

● Charge Plug: JST-XHR

● Discharge Plug: XT60

Includes

1 x Tattu R-Line Version 5.0 1400mAh 22.2V 150C 6S1P Lipo Battery-XT60

Battery Disclaimer:

● Li-Po and Li-Ion batteries must be cared for properly when stored, and 

● NEVER charged, balanced, or discharged unattended.
● ALWAYS be in the same room within line of sight of charging or discharging batteries.

● NEVER charge or discharge batteries on a flammable surface.
● Failure to follow these instructions may result in fire, personal injury, and/or property damage.
● By purchasing this battery, you agree that Pyrodrone and the battery manufacturer are in no way responsible for consumer battery charging and care, or any of the risks associated with Li-Pos or Li-Ions.

Recommendation Parts

● Tattu Gens ace iMars D300 G‑Tech Channel AC/DC 300W/700W RC Battery Charger

● T‑HOBBY T5146 FPV Drone Propellers

● MEPS NEON 2207 V2 Brushless Motor

● TBS Smoke Stopper FPV Drone Safety Tester XT30/XT60

Recommendation