MEPS NEON 2810 Long Range Flights FPV Motor for 7-8 inch Cinematic Drone 1180KV/1350KV

Cinematic Precision

Smooth at low throttle to steady your cinematic camera movements; powerful at high throttle to keep up with dynamic chase shots.

Exceptional High Thrust

Delivers strong thrust, ideal for heavy payloads.

Versatile NEON 2810 Motor

Compatible with a wide range of drone frames and setups, making it a versatile choice for both hobbyists and professional drone pilots.

Enhanced Flight Time

Experience Smoother and Longer Flights.

Advanced Materials for Robust Durability

Constructed with a durable stainless steel shaft, 6082 aluminum alloy housing, NMB bearings, N50H magnets, and heat-resistant copper wiring to ensure stability and a long service life.

Specifications

Size Chart

Recommendations

Package Included

Data Testing

Buyer’s Guide: MEPS NEON 2810 Long Range FPV Motor

Building a 7-inch to 8-inch long-range cinematic cruiser or high-altitude mountain-surfing platform requires a propulsion motor capable of swinging heavy props with authoritative low-RPM torque while maintaining low thermal resistance under extended load. The MEPS NEON 2810 Long Range FPV Motor (1180KV / 1350KV) utilizes an expanded 28 × 10 mm stator volume, a reinforced 5mm titanium alloy shaft, 6082-T6 aircraft aluminum housing, and high-temp N50H arc magnets to deliver robust thrust and thermal headroom for 6S exploration rigs.

Pilot Flight Impressions

"Moving to the NEON 2810 on my 7.5-inch mountain rig solved the low-throttle wobble and sluggish altitude recovery common with smaller 2806.5 stators. The taller 10mm stator height provides substantial low-end magnetic torque—cruising flat along ridge lines at 55–65 km/h requires minimal throttle input, and pulling out of high-speed vertical dives feels instantaneous with zero prop-wash shudder or mushy delay. On a 6S Li-Ion pack spinning 7040 or 8045 tri-blades, current draw stays clean and linear across the cruise band. Even after 18 to 22 minutes of continuous mountain cruising, the open-base cooling vents keep the motor bells barely warm, and the 5mm TC4 titanium alloy shaft has held up to rough field landings without throwing the bell out of balance."

Recommended Ecosystem & Hardware Pairings

● Flight Controller & ESC Stack: 55A–65A 4-in-1 ESC Stack with STM32F722 MCU (e.g., MEPS SZ F7 HD/Analog Stack, Flywoo GOKU F722 Pro V2 55A Stack).

● Propellers: 7-inch to 8.5-inch Long-Range & Cinematic Propellers (e.g., MEPS 8045 3-Blade, Gemfan 7040 3-Blade, HQProp 7x4x3, HQ 8x4x3).

● Batteries:

        ● Long-Range Cruise: 6S 4000mAh–8000mAh 21700 Li-Ion Packs (e.g., GEPRC Storm 6S2P 8000mAh, iFlight Fullsend 6S 4000mAh).

        ● Cinematic High-Burst: 6S 1750mAh–2200mAh 150C LiPo Packs (e.g., Boslipo P7 1750mAh 150C 6S).

● Frames: 7-inch to 8-inch Long-Range Deadcat or Carbon Freestyle Frames (e.g., iFlight Chimera7, GEPRC Crocodile7, Mark4 7"–8").

● Digital HD & Rescue: DJI O3 Air Unit, Walksnail Avatar HD Pro, high-power analog VTX, and independent GPS rescue modules.

MEPS NEON 2810 vs. T-HOBBY F90 2806.5

Selection Summary

● Choose the MEPS NEON 2810 if: You are building a 7-inch to 8.5-inch long-range mountain cruiser carrying a full-size action camera or heavy 21700 Li-Ion packs. The taller 10mm stator and reinforced 5mm titanium alloy shaft deliver the low-end torque, wind authority, and crash durability needed to conquer turbulent mountain drafts without thermal throttling.

● Choose the T-HOBBY F90 2806.5 if: You are building an ultralight 6-inch to 7-inch cruiser where cutting weight is the top priority. At just 46.6g per corner, it saves over 80g across the frame, maximizing battery efficiency and agility for smooth, flowing proximity lines.

Recommend Parts

● Boslipo P7 Version 1750mAh 150C 4/6S FPV Battery

● GEPRC Storm IRT21700‑40T 6S2P 8000mAh Li‑Ion Battery

● iFlight Fullsend 6S 4000mAh Li‑Ion 17.5C Battery

● Flywoo GOKU F722 Pro V2 55A 32Bit 128K 30X30 Stack

● BETAFPV VR04 HD FPV Goggles Digital High‑Definition Video

Recommendations