BetaFPV LAVA Series 2006 Brushless Motors

Specifically designed for 6S 3.5'' quads, this motor offers high agility and acceleration and features a high-performance 2400KV motor. Pilots enjoy flexible control and get more room for additional payload capacity.

These high torque motors feature GemFan D90S 3-Blade Propellers (1.5mm Shaft) to minimize prop wash oscillation and deliver lightning-fast responses, resulting in heightened thrust and power.

Perfectly matched with the F722 35A AIO V2 Flight Controller, this motor will bring pilots a powerful flight footage shooting experience with a 6S battery.

Specifications

Package

Buyer’s Guide: BetaFPV LAVA Series 2006 Brushless Motor

Building an agile 3.5-inch Cinewhoop or an aggressive 3.5" to 4" micro-freestyle quad requires a powertrain capable of swinging ducted props with immediate low-end authority while maintaining electrical efficiency. The BetaFPV LAVA Series 2006 Brushless Motor (2400KV) uses an optimized 2006 stator footprint, high-grade curved arc magnets, and a low-profile unibell design to provide the high stator volume and immediate torque needed to haul HD cameras on 6S high-voltage micro builds without thermal fade.

Pilot Flight Impressions

"Swapping over to the LAVA 2006 2400KV motors on my 3.5-inch Pavo35 carrying a full DJI O3 setup completely eliminated the sluggish, floaty feel often found in pusher ducted cinewhoops. The 2006 stator provides substantial low-end torque—holding smooth, level proximity lines through indoor doorways requires much less throttle modulation, and punching out of sudden prop-wash or vertical descents feels instantaneous without voltage brownouts or mid-throttle oscillation. In aggressive outdoor bando flying on a 6S 1100mAh pack, the motors stay remarkably efficient, delivering 5 to 6.5 minutes of smooth cinematic airtime. Even after running back-to-back packs with full-throttle bursts, the open stator vents shed heat effectively so the bells land barely warm, and the 1.5mm output shaft with 12×12mm base mounting provides a stiff, crash-resilient anchor against hard concrete tumbles."

Recommended Ecosystem & Hardware Pairings

● AIO Flight Controllers: 35A–45A Toothpick/Cinewhoop AIO FCs (e.g., T-HOBBY F7 35A AIO FC, JHEMCU GHF745 HD AIO 40A, JHEMCU GHF405AIO-HD 40A).

● Frames: 3.5-inch Cinewhoop pusher frames and 3.5"–4" lightweight freestyle platforms (e.g., BetaFPV Pavo35, SpeedyBee Bee35, CineLog35).

● Propellers: 3.5" 3-Blade / 5-Blade Ducted Propellers (e.g., Gemfan D90S 3-Blade, HQ T90MMX3, Gemfan 3520).

● LiPo Batteries: 6S 850mAh–1400mAh High-C LiPo packs (e.g., Tattu R-Line V5.0 850mAh 6S, Boslipo P7 850mAh 6S).

● HD Systems: DJI O3 Air Unit, Walksnail Avatar HD Pro, or Caddx Nebula Pro.

BetaFPV LAVA 2006 vs. MEPS SZ2104

Selection Summary

● Choose the BetaFPV LAVA Series 2006 if: You are flying or building a 3.5-inch ducted pusher Cinewhoop (such as the Pavo35, CineLog35, or Bee35) carrying a DJI O3 or action camera on a 6S setup. The taller 6mm stator height produces the raw torque required to overcome duct resistance, delivering stable tracking lines and instant dive recoveries under payload.

● Choose the MEPS SZ2104 if: You are building an open-prop 3" to 4" Toothpick or ultralight bando freestyle quad. At just 18.0g per corner (~17g lighter per set), its wide, low-profile stator minimizes rotational weight, maximizing flight agility, acceleration, and sub-250g compliance.

Recommendation Parts

● T‑HOBBY F7 35A/45A Aio For Cinewhoop Toothpick

● JHEMCU GHF745 HD AIO 40A F7 OSD Flight Controller

● Tattu R‑Line Version 5.0 850mAh 4S 150C 14.8V Lipo Battery Pack

● MEPS SZ1218 Tinywhoop Propeller

Recommendations