Q: What type of build is the Flywoo GOKU GN 745 V3 designed for?

A: It’s an AIO flight controller + 45A ESC combo optimized for 5" freestyle, racing, and cinematic FPV drones — great for both smooth cruising and aggressive flight styles.

Q: Why should I choose the MPU6000 V3 version?

A: The V3 uses an MPU6000 gyro for consistent gyro data and smooth flight feel, reducing jitter compared to older IMUs — perfect for Betaflight races and freestyle.

Q: Is this flight controller beginner-friendly?

A: Yes. Pre-installed firmware and clear UART/ESC pads make installation easy for beginners and intermediate builders, while advanced pilots get tuning flexibility.

Q: What makes Flywoo GOKU better than standard FC + ESC stacks?

A: The integrated design reduces wiring complexity, lowers weight, and improves power efficiency — less clutter means better signal integrity and cleaner performance.

Q: Is the GN 745 V3 good for high-performance 5″ freestyle?

A: Yes. With 45A continuous ESC rating and robust MOSFETs, it supports aggressive throttle punch and big props up to 5″ without thermal issues.

Q: Can it handle long bursts in freestyle or racing flights?

A: Yes. The efficient ESC tuning and 32-bit MCU ensure solid throttle response and thermal control during hot laps or long freestyle sessions.

Q: Does it come with BLHeli firmware and DShot support?

A: Yes. Supports BLHeli_S / BLHeli_32 ESC protocols with DShot150/300/600 for modern ESC features and responsive motor control.

Q: Is this FC compatible with DJI O3 / O4 HD systems?

A: Yes — with proper wiring and camera/OSD configuration, it works smoothly with DJI O3/O4 HD setups.

Q: What flight firmware does it use (Betaflight / Cleanflight)?

A: It runs Betaflight out of the box, with ready-to-go presets — advanced pilots can fine-tune PIDs, filters, and runtime profiles.

Q: How easy is installation and wiring?

A: Very easy. All pads/ports are labeled clearly and provided with solder target markers, reducing build time and assembly mistakes.

Q: Does the GN 745 V3 support smart audio and VTX control?

A: Yes. Integrated UART pads support SmartAudio / IRC Tramp for easy OSD and VTx frequency control.

Q: What ESC and motor setups are recommended?

A: Works best with 4–6S setups and 5″ motors up to ~2400 KV; pair with quality 20–22A motors and balanced props for optimal performance.

Q: How do I avoid overheating or desync issues?

A: Use balanced props, proper battery filtering, and avoid extremely aggressive PID gains/filters until tested — this reduces ESC load and heat.

Q: What common build mistakes should be avoided?

A: Avoid loose solder joints, incorrect UART assignments, and reversed motor pads — these cause signal loss or gyro noise.

Q: What support and warranty does MEPSKING offer?

A: MEPSKING provides setup help, firmware guidance, and warranty support if there is a manufacturing defect.

GOKU GN 745 45A AIO 32bit (MPU6000 ) V3 Picture

Photos
Videos

Flywoo GOKU GN 745 45A AIO 32bit V3 Plug&Play O4 / O4 Pro

About Flywoo GOKU GN 745 45A AIO 32bit V3:

The Flywoo GOKU GN 745 45A AIO V3 is a premium FPV Flight Controller integrated with a 45A BLHELI_32 ESC, specifically designed for 3-5 inch cinewhoops, toothpick drones, and ultralight builds. Featuring the stable ICM42688P gyro, STM32F745 MCU, and 7 UARTs, this 25.5x25.5mm AIO supports 2-6S Lipo for maximum power and DJI O3 compatibility.

Flywoo

$12 Off Orders $159+

$18 Off Orders $249+

Collect

$ 93.99 ~~$108.99~~

-14%

4.9 | 223Sold

Options (1)

Quantity

Add-ons

Bundle and save up to $1.53 on gear — upgrade your setup for less.

Flywoo Explorer 18650 4S/6S 3000mAh Li-Ion FPV Long Range Battery P30B
4S1P 3000mAh XT30UP
$49.46 Save $1.53

In Stock Expected ship within 5 days after order.

Free Shipping Over $79 | Save on Orders $79+
24-Month Warranty | 2 Years Full Protection
30-Day Returns From Shipment | 7-Day No-Reason Returns
24h Support Response | 24h Fast Support Guarantee

Top highlights

Performance: Utilizes STM32F745 chip, AM32 firmware, and ICM42688P gyro, with dual BEC, barometer, black box, supports 7 serial ports and I2C.
Plug and Play: Compatible with O3 air unit, GPS, Camera, Analog VTX, and Receiver without the need for soldering.
Type-C Interface: Features a Type-C interface for improved compatibility and easier connection.
Compatibility: Supports BF, INAV, and Ardupilot platforms.
New Layout: New ESC two-in-one drive solution, with a continuous current up to 45A.
Better Protection: Larger motor pad area with improved overcurrent protection.

Payment | Every order you place with us is safe & secure

Check out our 45A AIO, all AIO Flight Controller Collection and the rest of our Flywoo Products!

Stability with ICM42688P Gyro

Equipped with the industry-standard ICM42688P gyroscope, the GOKU GN 745 V3 offers superior vibration resistance. Unlike more sensitive modern gyros, the MPU6000 ensures your flight controller receives clean data, resulting in "locked-in" flight feel and buttery-smooth cinematic shots straight out of the box.

Dual BEC Output for Simplified Wiring

Setting up your VTX has never been easier. The GN 745 V3 features built-in dual BECs: a 5V/2A output for your receiver and LEDs, and a dedicated 10V/2A output specifically designed to power high-voltage digital systems like the DJI O3 or Walksnail Avatar.

pc flywoo goku gn 745 45a aio plug and play

BF745 Processor + 32-bit ESC for Serious Performance

Powered by an STM32F745 MCU and a high-performance 32-bit 45A ESC with bidirectional DShot support, the GOKU GN745 V3 delivers faster processing, cleaner signals, and reliable power for demanding FPV builds.

pc flywoo goku gn 745 45a aio advantages

Built for Cleaner Wiring & Tougher High-Current Flights

Flywoo GOKU GN745 45A AIO V3 features larger solder pads, an 8-layer PCB for improved conductivity, and a Type-C port for more convenient and stable connections.

flywoo goku gn 745 45a aio applicable scenarios

From Toothpicks to Long Range

The compact 25.5x25.5mm mounting pattern makes this AIO compatible with a vast array of frames. It is the perfect choice for:

● 2.5-3 Inch Cinewhoops: Reliable power for high-payload cinematic flying.

● 3-4 Inch Ultralight Toothpicks: Maximum weight savings for agility.

● Sub-250g Long Range: Efficient power management for extended flight times.

pc flywoo goku gn 745 45a aio fpv aircraft used

Highlights：

1.Performance: Utilizes STM32F745 chip, AM32 firmware, and ICM42688P gyro, with dual BEC, barometer, black box, supports 7 serial ports and I2C.

2. Plug & Play: Compatible with O3 air unit, GPS, Camera, Analog VTX, and Receiver without the need for soldering.

3. Type-C Interface: Features a Type-C interface for improved compatibility and easier connection.

4. Compatibility: Supports BF, INAV, and Ardupilot platforms.

5. New Layout: New ESC two-in-one drive solution, with a continuous current up to 45A.

6. Better Protection: Larger motor pad area with improved overcurrent protection.

Flywoo GOKU GN745 45A AIO V3 Review

A Powerful All-in-One Flight Controller for Cinematic & Freestyle FPV Builds

When building a compact FPV drone, one of the biggest challenges is finding the right balance between power, reliability, weight, and wiring simplicity.

After testing different AIO flight controllers, the Flywoo GOKU GN745 45A AIO V3 stands out because it delivers the performance of a traditional FC + ESC stack while keeping the entire build cleaner and lighter.

With an integrated F7 flight controller, 45A 4-in-1 ESC, MPU6000 gyro, multiple UARTs, and support for 2-6S batteries, this AIO board is designed for pilots who want a compact but powerful setup.

Flywoo GOKU GN745 V3 vs Popular AIO Flight Controllers

Choosing an AIO flight controller is not only about ESC current rating. For modern FPV builds, pilots also care about processing power, UART availability, HD system compatibility, GPS support, and future upgrade possibilities.

We compared the Flywoo GOKU GN745 45A AIO V3 with two popular AIO controllers to see where it stands.

Feature	Flywoo GOKU GN745 45A AIO V3	SpeedyBee F405 AIO 40A Bluejay	iFlight Blitz Mini F745
Target User	Advanced FPV pilots / HD builds	Budget freestyle & beginners	Performance-focused pilots
MCU	STM32F745	STM32F405	STM32F745
Gyro	MPU6000 / ICM42688 Option	MPU6000	ICM42688
ESC Rating	45A 4-in-1 ESC	40A 4-in-1 ESC	Depends on Version
Battery Support	2-6S LiPo	3-6S LiPo	Depends on Setup
UART	7 Hardware UARTs	Limited UART Resources	6 UARTs
Blackbox	16MB	Limited Depending Version	16MB
Mounting	25.5×25.5mm	25.5×25.5mm	20×20mm
Best For	Cinewhoop, Long Range, HD Freestyle	Everyday Freestyle Builds	Compact Performance Builds

Which One Should You Choose?

Your Build	Recommended
Budget freestyle drone	SpeedyBee F405 AIO
Beginner FPV build	SpeedyBee F405 AIO
DJI O3/O4 Cinewhoop	Flywoo GN745 V3
GPS Long-range Drone	Flywoo GN745 V3
iNav / ArduPilot Project	Flywoo GN745 V3
Compact High-performance Build	Flywoo GN745 V3 / iFlight Blitz

Final Verdict

The Flywoo GOKU GN745 45A AIO V3 is not designed to compete only on price.

Compared with popular F405-class AIO boards, it offers:

✅ More processing power
✅ Higher ESC capacity
✅ More UART expansion
✅ Better support for advanced FPV systems
✅ Cleaner builds for HD and long-range drones

For pilots who simply want an affordable freestyle AIO, SpeedyBee F405 remains a strong choice. But for experienced pilots building a DJI O3/O4 cinewhoop, GPS drone, or high-performance freestyle quad, the Flywoo GN745 V3 provides a more future-proof platform.

Specifications

BF Flight Controller Firmware: FLYWOOF745AIO	INAV Firmware: FLYWOOF745	Ardupilot Firmware: FLYWOOF745
MCU: STM32F745 32-bit processor,216MHz, 1MB Flash	IMU: MPU6000 (SPI)	Barometer: SPL06
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)	7 hardware UARTS (UART1,2,3,4,5,6,7)	Supports serial receivers (SBUS, iBus, Spektrum, Crossfire)
PPM and PWM receivers are not supported.	Onbord 16Mbytes for Blackbox logging	5V Power Out: 2.0A max
3.3V Power Out: 0.5A max	Dimensions: 33.5x33.5mm	Weight: 9.4g
Mounting Holes: Standard 25.5/26.5mm square to center of holes

Onboard 4in1 ESC

● Support AM32

● Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600,Dshot1200

● Input Voltage: 2-6S Lipo

● Continuous Current: 45A

● Firmware: GOKU_F4A32_PRO

flywoo goku gn 745 45a aio wiring diagram

Package

Recommendation

More Expert Advice

How to Connect 4 in 1 ESC to Flight Controller

How to Choose an FPV Flight Controller in 2026?

Flight Controller Not Connecting to Betaflight? Complete Troubleshooting Guide (2026)

FPV AIO Flight Controller Guide for Beginners in 2026

Reviews

L**m
Verified

Pads are nicely laid out,happy so far.

KV：45A AIO 32bit (MPU6000 ) V3
E**a
Verified

Easy to install and seems well made.

KV：45A AIO 32bit (MPU6000 ) V3
Z********t
Verified

Sehr gutes Stack-Layout, läuft ruhig und die ESC werden nicht heiß.

KV：45A AIO 32bit (MPU6000 ) V3
P***o
Verified

fast shipping, happy with the purchase.

KV：45A AIO 32bit (MPU6000 ) V3
D*****n
Verified

Sehr guter AIO.

KV：45A AIO 32bit (MPU6000 ) V3
J**k
Verified

This stack just “feels right”

KV：45A AIO 32bit (MPU6000 ) V3
E**********w
Verified

This stack is rock solid. Flashed Betaflight quick and flight performance is super smooth with MPU6000.

KV：45A AIO 32bit (MPU6000 ) V3
R**f
Verified

Arrivé bien emballé. Très bon contrôleur

KV：45A AIO 32bit (MPU6000 ) V3

FAQ Feel free to ask us any questions

Q: What type of build is the Flywoo GOKU GN 745 V3 designed for?: A: It’s an AIO flight controller + 45A ESC combo optimized for 5" freestyle, racing, and cinematic FPV drones — great for both smooth cruising and aggressive flight styles.
Q: Why should I choose the MPU6000 V3 version?: A: The V3 uses an MPU6000 gyro for consistent gyro data and smooth flight feel, reducing jitter compared to older IMUs — perfect for Betaflight races and freestyle.
Q: Is this flight controller beginner-friendly?: A: Yes. Pre-installed firmware and clear UART/ESC pads make installation easy for beginners and intermediate builders, while advanced pilots get tuning flexibility.
Q: What makes Flywoo GOKU better than standard FC + ESC stacks?: A: The integrated design reduces wiring complexity, lowers weight, and improves power efficiency — less clutter means better signal integrity and cleaner performance.
Q: Is the GN 745 V3 good for high-performance 5″ freestyle?: A: Yes. With 45A continuous ESC rating and robust MOSFETs, it supports aggressive throttle punch and big props up to 5″ without thermal issues.