HOMEBeginnerT-HOBBY Velox V50A 4in1 ESC For FPV Drone
1893956573389000705
T-HOBBY Velox V50A 4in1 ESC For FPV Drone
About T-HOBBY V50A SE 50A 6S 4in1 ESC for FPV Drone:
Introducing the T-HOBBY Velox V50A SE 6S 4in1 FPV ESC, a nice 50A drone ESC designed for high-performance drones. Designed for seamless integration and maximum efficiency, this 4IN1 FPV ESC delivers robust 6S capability, making it one of the great 6S FPV ESCs on the market. With a 30.5x30.5mm mounting holes, the V50A SE ESC is perfect for larger builds, ensuring optimal power delivery and enhancing your drone's overall performance.
Via in pad and double-side welding improve fault tolerance.
Payment | Every order you place with us is safe & secure
Share
Copy
Description
FAQ
Welding Tip:
● Don't add too much tin wire too fast in the welding process, in case the solder ball spills out.
● Stick a layer of electrical tape above the cooling fin before welding in case tin or other pollutants spot on the fin.
● Please carefully check if there are any tin balls or bonded soldering joints before powering up in case equipment damage is caused by a short-circuit.
● Please use 95% or higher purity alcohol or water when cleaning PCB and don't squeeze components and wires much.
Notice:
● Each time ESC is connected to the system, the input throttle signal will be detected automatically when powered on and execute the corresponding throttle mode.
● When BLDC motor is connected to the system for the first time, or RC equipment is changed, throttle calibration is required. Please skip throttle range calibration when the input signal is Dshot mode.
● Don't flash any other firmware to avoid ESC damage.
● Please repeatedly check if the polarity and connection sequence are correct before powering up. A wrong connection would damage the equipment.
● Please power off first when plugging in or making any connections.
● Please use within the range of ESC working current.
● Please use welding equipment with full power and choose the right-sized welding head. Try to avoid any equipment that is out of operation or damaged by short-circuits or wrong welding.
● VBAT is battery voltage. If connecting to other equipment, please make sure that the input voltage is within the range.
● CRT. (Current) is curent detection output interface can connect T-HOBBY F4、F7 or other FC can support current detection.
● If any questions, please contact MEPSKING after-sales technical support.
Remedies after water:
● Please power off at first once ESC, FC or other PCBs (including motors) meet water damage, and don't power on again.
● Clean all clutter and dry with hairdryer.
● Please don't power on again before making sure there is no water inside any more. Please contact our after -sale service center ASAP.
● If you can see solder joints or bumt traces on components, which means this power section has burned out. Please don't power on again then lead to further damage.
Package included:
● 1x T-HOBBY V50A SE 50A 6S 4in1 ESC
● 1x 8P/10P Exchangeable Wiring Harness
● 1x 8P/8P Silicone Wiring Harness
● 1x XT60 14AWG 145mm Cable
● 4x Shock Absorbing Washer
● 1x Capacitor
Reviews
M****C
Verified
Sehr gutes Preis-Leistungs-Verhältnis für die Velox V50A. Bessere Wärmeabfuhr und mehr Leistung, passt perfekt zu meinen 5-Zoll FPV Aufbauten. Absolut empfehlenswert.
V50A：V50A
S***h
Verified
Shopping on mepsking is always super convenient. Order process simple, product description matches exactly, shipping fast and package well protected. Whole purchase experience is really comfortable.
V50A：V50A
M*********g
Verified
Perfect fit for 30.5x30.5 stack setup, super easy to install and wire. Performance increased as advertised, acceleration feels much more responsive than ordinary 4in1 ESC. Great for both racing and freestyle.
V50A：V50A
F******e
Verified
Upgraded to Velox V50A for my 5-inch freestyle build. The upgraded MOS brings obvious power boost, heat dissipation is way better than old ESC. Throttle output is linear and super smooth even under full load.
V50A：V50A
Additional reviews after 16
days
Works stable in daily flight, no overheating at all.
m*x
Verified
ESC runs smooth and cool on my 5-inch freestyle build.
V50A：V50A
Additional reviews after 10
days
Still performing perfectly, no overheating or cutoffs.
j******************2
Vine Voice
MEPSKING Vine Customer Review of Free Product
Great 4in1 ESC, both aesthetically and performance-wise. The firmware is BLheli32. The 50A current rating fits perfectly builds ranging from 5 inches up to 7 inch long range cruisers. The esc comes with a XT60 connectors and cables, various silicone rubber dumpers and flat connectors to the FC, with some customizable cables for FC different from T-hobby/T-motors. Great value great esc!
video link: https://www.instagram.com/p/DVQZJJejFGv/
V50A：V50A
Replied by MEPSKING:Thank you for your great review and for sharing the video! We’re glad the 4-in-1 ESC meets your expectations in both performance and design. Thanks for joining the Vine Voice Program—Happy Flying!
a***********9
Vine Voice
MEPSKING Vine Customer Review of Free Product
Lovely esc , I was lucky enough to win this,thank you mepsfpv
V50A：V50A
Replied by MEPSKING:Thank you for your review and for joining Vine Voice! We’re glad you’re enjoying the ESC—congrats on the win. Happy flying! 🚀
M********v
Verified
Vine Voice
MEPSKING Vine Customer Review of Free Product
I received the T-Motor Velox V50A 4-in-1 ESC through the Vine Voice program for testing. It is a very popular choice for FPV freestyle drones, and for good reason. The motor response is incredibly smooth, and the 50A rating provides great power for aggressive flying. The build quality is excellent, with a heatsink that handles heat very well. It was easy to solder and install. Highly recommended for any reliable 5-inch build!
V50A：V50A
Replied by MEPSKING:Thank you very much for your review and for participating in the Vine Voice program! We’re glad to hear that you’re satisfied with the quality, response, 50A output, and ease of installation of the T-Hobby 50A ESC. Your recommendation means a lot to us. Happy flying! 🚀
1
2
FAQFeel free to ask us any questions
ASK A QUESTION
Q1: What are the main advantages of the T-Hobby Velox V50A 4-in-1 ESC?
A1: The Velox V50A features the AM32 open-source firmware, providing smoother throttle control, faster response, and customizable tuning options. It supports 3–6S LiPo batteries, delivering reliable power for FPV racing and freestyle drones.
Q2: Does the Velox V50A support digital motor protocols?
A2: Yes. It supports DShot600, DShot1200, and other modern digital protocols, ensuring stable and efficient communication between the flight controller and motors for precise flight performance.
Q: Is the T-HOBBY Velox V50A mainly a 5-inch ESC, or can it also work on 7-inch builds?
A: It fits both, but it is especially attractive for strong 5-inch freestyle builds and selected 6-inch to 7-inch setups that still want a standard 30.5×30.5mm 4-in-1 layout.
Q: Is this ESC more suitable for freestyle or for long-range builds?
A: It can serve both, but it is more naturally positioned for freestyle and general performance builds than for highly endurance-focused long-range setups.
Q: Is the Velox V50A a good choice for pilots who want a simple mainstream stack layout?
A: Yes. Its standard 30.5×30.5mm mounting, included harnesses, capacitor, and XT60 lead make it practical for straightforward builds with fewer compatibility surprises.
Verified
