Radiomaster RP3 V2 ExpressLRS 2.4ghz Nano Receiver

About RP3 V2 ExpressLRS 2.4ghz Nano Receiver:

The RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience. The RadioMaster RP series of receivers are designed with size, ease of use and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware the RP series of nano receivers deliver features and range today's pilots have come to expect. Developed around the ESP8285 MCU and SX1280IMLTRT RF Chip the RP series offer Lora and FLRC 2.4ghz RF links offering incredible range and low latency. With Wifi built-in FW updates can be done on your craft without the need to remove the receiver. Binding can be done using a bind phrase meaning no more bind plugs or fiddly button presses while trying to plug in your battery. The RP3 receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance and antenna switching for antenna diversity. Except for the RP3 Receiver, we also provide the RP1 and RP2  Receiver for your choice.

Slay range anxiety!Flip this pocket powerhouse: LNA v2.0 = 40% cleaner video through concrete jungles. HPA side = 3X telemetry punch for canyon dives. Built for DJI goggles & ExpressLRS rigs. Rock-solid signal where rivals drop.

TCXO (temperature compensated crystal oscillator)

The TCXO ensures high stability and accuracy in frequency control, compensating for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation.

DUAL-ANTENNA BOOST: Twin polarized dipoles eliminate dead zones! 83% lower packet loss in concrete/forest flights. Plug-&-play stability for ELRS rigs.

Specifications

Item: RP3 Diversity Receiver 

Type: ISM 

MCU: ESP8285 

RF Chip: SX1281 Telemetry 

RF power: Max 100mw 

Antenna: 65mm 2.4ghz T Antenna x 2 

Frequency Range: 2.404 - 2.479 Ghz 

Maximum receive refresh rate: 500Hz / F1000Hz 

Minimum receiver refresh rate: 25Hz 

Working voltage: DC 5V 

Weight: 4.6g (Including two antenna) 

Dimension: 22mm*13mm*4mm 

Firmware Version: ExpressLRS v3.0 pre-installed 

FW Target: RadioMaster RP3 Diversity 2400 RX 

Bus interface: CRSF

Size

Recommendations