Q: What type of FPV drones is the Happymodel SuperX HD ELRS AIO designed for?

A: The Happymodel SuperX HD ELRS AIO is designed for 1S-2S Tiny Whoops, lightweight toothpick drones, and other micro FPV builds. Its integrated flight controller, 12A ESC, and ELRS receiver help reduce weight while simplifying installation.

Q: Does this flight controller support HD digital FPV systems?

A: Yes. The SuperX HD AIO is specifically designed for HD digital FPV systems and is compatible with several lightweight HD VTX options. Please verify the wiring requirements of your specific video transmission system before installation.

Q: Which radio protocol is built into this AIO board?

A: The board features a built-in SPI ExpressLRS (ELRS) receiver, providing low latency, long-range performance, and a reliable control link without requiring an external receiver.

Q: Can I use this AIO with 2S LiPo batteries?

A: Yes. The SuperX HD ELRS AIO supports both 1S and 2S LiPo batteries. Be sure to use motors and propellers that are suitable for your selected battery voltage to achieve the best performance.

Q: What firmware does this flight controller support?

A: The flight controller supports Betaflight firmware, allowing pilots to configure flight settings, receiver options, OSD, PID tuning, and other features through the Betaflight Configurator.

Q: Is this AIO suitable for beginners?

A: Yes. With the flight controller, ESC, and ELRS receiver integrated into one compact board, the SuperX HD AIO simplifies wiring and reduces overall build complexity, making it a great choice for both beginners and experienced FPV pilots.

New

Happymodel SuperX HD ELRS 1-2S AIO F411 FC 12A ESC

Flight controller SuperX HD ELRS

● Betaflight 4.4.2 firmware ready

● Firmware target: CRAZYBEEF4DX

● MCU:STM32F411CEU6 (100MHz, 512K FLASH)

● Sensor: BMI270 or ICM42688P (SPI connection)

● Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone

● Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read

● Built-in UART ELRS receiver, ELRS v3.0 ready, support WIFI and pass-through firmware update

● Bluejay ESC Firmware ready

● Built-in 5V 1.5A(Max) BEC

● Built-in voltage detection.

● Built-in currents meter

● No betaflight analog osd chip

● Antenna: Enamel copper wire

Onboard 4in1 ESC

● Power supply: 1-2S LiPo/LiPo HV

● Current: 12A continuous peak 15A (3 seconds)

● Support ESC-Configurator and BLHELI_S Suite configurator

● Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz

● Default protocol: DSHOT300

Onboard UART ExpressLRS 2.4GHz Receiver

● RF Frequency: 2.4GHz

● Antenna: enameled copper wire 31mm length

● Telemetry output Power: <12dBm

● Receiver protocol: CRSF

● Default firmware version: ExpressLRS V3.0.1

● The same hardware with Happymodel EP1 receiver

● Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through

Happymodel

$12 Off Orders $159+

$18 Off Orders $249+

Collect

$ 52.00 ~~$62.00~~

-16%

5 | 12Sold

Options (1)

Quantity

Add-ons

Bundle and save up to $0.69 on gear — upgrade your setup for less.

T-HOBBY M0803II 22000KV Micro FPV Motor for 65–75mm micro whoops
22000KV
$8.20 Save $0.52
MEPS SZ1218 Tinywhoop Propeller for FPV Micro Drones Lightweight
Clear Orange / 4pcs
$1.73 Save $0.17

In Stock Expected ship within 5 days after order.

Free Shipping Over $79 | Save on Orders $79+
24-Month Warranty | 2 Years Full Protection
30-Day Returns From Shipment | 7-Day No-Reason Returns
24h Support Response | 24h Fast Support Guarantee

Top highlights

Cutting-Edge Software: Arrives Betaflight 4.4.2 firmware-ready, ensuring you're always at the forefront of technological advancements.
Integrated Superiority: Merges the power of a 12A 4in1 ESC with a UART ELRS Receiver, encapsulating the essence of streamlined digital whooping.
Bluejay ESC Firmware Compatibility: Offers a hassle-free user experience, eliminating potential compatibility issues.
Unprecedented Speed with ExpressLRS V3.0.1: Pre-installed and boasting unparalleled speed, setting new standards in responsiveness.
Elimination of Unnecessary Components: Opts out of the Betaflight Analog OSD Chip, recognizing the irrelevance for an HD flight controller.

Payment | Every order you place with us is safe & secure

Reviews

A*********b
Verified

Firmware flashed without any problems and Betaflight recognized the board immediately. A great upgrade for any 1S or 2S FPV drone.

SuperX HD AIO：SuperX HD AIO
R*******h
Verified

Very responsive and smooth throttle control. I've completed dozens of flights without a single issue and the board remains cool.

SuperX HD AIO：SuperX HD AIO
D********t
Verified

Great overall quality and clean layout. Everything fit perfectly inside my lightweight frame and the HD wiring was straightforward.

SuperX HD AIO：SuperX HD AIO
F*********r
Verified

The built-in ELRS receiver provides a solid signal with very low latency. Perfect choice for anyone building a compact freestyle quad.

SuperX HD AIO：SuperX HD AIO
Q*********r
Verified

Excellent flight controller for small HD builds. The board stays stable even during aggressive flying and the solder pads are easy to work with.

SuperX HD AIO：SuperX HD AIO
M********t
Verified

This AIO board is lightweight and performs flawlessly. ESC response is smooth and Betaflight setup only took a few minutes.

SuperX HD AIO：SuperX HD AIO
T**********o
Verified

Installation was quick and everything worked perfectly on my 2S whoop. The integrated ELRS receiver binds fast and delivers a reliable control link.

SuperX HD AIO：SuperX HD AIO
E*******t
Verified

Great value for an all-in-one FC. The built-in ELRS receiver connects quickly, control feels precise, and the board has been completely reliable so far.

SuperX HD AIO：SuperX HD AIO

Happymodel SuperX HD ELRS 1-2S AIO F411 FC 12A ESC

About Happymodel SuperX HD ELRS 1-2S AIO F411 FC 12A ESC

Specifications

Includes

Recommendation