GEPRC GEP-F722-35A 2-6S AIO for Cinewhoop & Toothpick FPV Build for Pilots
About GEP-F722-35A AIO:
GEP-F7-35A adopts MCU STM32F722,which has powerful performance and higher computing speed.It has 5 full UART ports and can connect more external devices.
We designed a 6-pin connector for DJI AIR UNIT MODULE,just plug and play.
The BLheili_S 35A ESC can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.Support OSD parameter adjustment, buzzer, led and other functions. It is 8.8g ultra light weight, and 25.5mm * 25.5mm mounting hole, suitable for most of the frames on the market.
We pursue lighter weight, smaller volume, more functions and better performance of FC.
● MCU:STM32F722,with strong performance and higher computing speed.
● It has 5 full UART ports, which connect more external devices
● 3Design 6p connector for DJI AIR UNIT MODULE, and just plug and play .
● The BLheili_S 35A ESC can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.
● Support OSD parameter adjustment, buzzer, led and other functions.
● 8.8g ultra light weight
● 25.5mm * 25.5mm mounting hole, suitable for most frames
Diagram
Recommendations:
Includes:
1 x GEP-F7-35A AIO
1 x XT30-7CM-18AWG Power cables
1 x 35V220UF capacitance
1 x SH1.0-6Pin to GH1.25-8Pin cables
8 x M2*6.5mm Damping rings
Reviews
L******.
Verified
Sehr stabil im Flug, keine Probleme bisher. gute Qualität für den Preis
Optins：GEP-F722-35A AIO
Purchased 2 times
M******.
Verified
fast shipping, arrived earlier than I thought. everything working fine so far on 4S build
Optins：GEP-F722-35A AIO
Purchased 2 times
J******.
Verified
board came well packed, no damage at all. solder pads are clean and easy to work with. setup was pretty smooth
Optins：GEP-F722-35A AIO
Purchased 3 times
C**********o
Verified
Great AIO board with clean layout and stable ESC performance. Easy to install and configure.
Optins：GEP-F722-35A AIO
Purchased 2 times
K******.
Verified
not bad, but wiring is a bit tight for my frame. still works good after setup
Optins：GEP-F722-35A AIO
Purchased 4 times
B*********r
Verified
Good overall board, but solder pads are a bit small. Performance is solid once installed.
Optins：GEP-F722-35A AIO
E******.
Verified
took some time to configure. not super beginner friendly honestly. but support replied fast when I asked questions
Optins：GEP-F722-35A AIO
Additional reviews after 3
days
after tuning it works fine now
FAQFeel free to ask us any questions
Q: Is this AIO board suitable for beginners?
A: It’s suitable for beginners who have basic soldering skills. Compared to stack setups, AIO boards are simpler to install, but require careful wiring since everything is integrated.
Q: What size drones is this AIO best for?
A: It works best for 3"–4" drones, cinewhoops, and lightweight 5" builds. It’s not recommended for heavy 5" freestyle or high-power racing setups.
Q: Can it handle 6S batteries?
A: Yes, it supports 2–6S LiPo input, but for reliability and lower heat, 4S–6S setups should use appropriate motors and props.
Q: Is 35A ESC enough for my build?
A: Yes for most 3–4" and light 5" builds. If you run high KV motors with aggressive props, current spikes may exceed safe limits.
Q: Does it support DJI O3 / Vista / HD systems?
A: Yes, it includes a plug-and-play connector for digital FPV systems, making installation cleaner and easier.
Verified