About BETAFPV Matrix 1S Brushless Flight Controller:
The Matrix 1S Brushless Flight Controller redefines 1S whoop performance with two purpose-driven architectures: the 3IN1 for DJI O4 digital dominance (integrating FC, ESC, and ELRS 2.4G RX while omitting analog OSD), and the 4IN1 for analog mastery (adding built-in OSD + solder pads for external VTXs). Both feature the iconic cross-design architecture, newly developed BEC, 18A peak ESCs, and the STM32G473 MCU for 55% faster processing—delivering effortless setup, pro-tier control, and uncompromised flight dynamics that rewrite 1S standards.
Bundle and save up to $1.50 on gear — upgrade your setup for less.
BETAFPV 0702 Brushless Motors (2026) for 65mm FPV Whoop 1S
Options (3)
Champion 36000KV
Racing 30000KV
Freestyle 25000KV
Champion 36000KV
$48.49
Save $1.50
In Stock
Expected ship within 5 days after order.
Free Shipping Over $79 | Save on Orders $79+
24-Month Warranty | 2 Years Full Protection
30-Day Returns From Shipment | 7-Day No-Reason Returns
24h Support Response | 24h Fast Support Guarantee
Top highlights
4IN1 AIO design with built-in FC + ESC + OSD, optimized for analog FPV whoop builds.
Powerful STM32G473 MCU delivers faster processing and smoother flight than F411-based FCs.
12A continuous ESC (18A peak) provides stronger punch and better stability for aggressive flying.
Advanced BEC ensures stable voltage output even at low battery levels for reliable video transmission.
Lightweight ~3.6g design reduces overall drone weight while maintaining durability.
Payment | Every order you place with us is safe & secure
Share
Check out our 1S Brushless Flight Controllers, all Flight Controllers Collection and the rest of our BETAFPV Products!
Enhanced Continuous 12A ESC
HD image transmission adds weight to 1S whoops, demanding stronger power and higher ESC overcurrent capacity. Our engineers exceeded expectations, delivering a robust ESC with 12A continuous output and 18A peak capacity on the iconic "cross" flight controller. This ensures optimal thrust-to-weight ratio, reliable performance, and worry-free high-definition flights.
Faster Processing, Smoother Flight
Powered by STM32G473 MCU, delivering significantly faster response than F4 FCs. Improves PID loop accuracy and flight stability.
Ultra-Light 3.6g Design
Minimizes overall drone weight for improved agility and longer flight time. Perfect for whoop racing and freestyle.
Ultra-Low Voltage Support, Zero Blackouts
High-performance digital VTX requires consistent current, especially on 1S whoops where voltage can drop to 3.3V. Our advanced BEC is engineered to deliver a powerful 3A output even at ultra-low voltages down to 2.85V. This ensures a stable, flicker-free image transmission during critical low-battery moments, giving you the best chance to recover your drone safely.
Effortless Setup and Maintenance
The Matrix 1S 3IN1 HD FC is designed to maximize your flight time by minimizing setup hassle. Equipped with convenient motor plugs and a SH1.0-6Pin HD digital port, it allows for a completely solder-free installation and maintenance process. Now, you can focus more on enjoying high-definition flight experiences instead of dealing with complex tools.
Attention
● Crafted for newcomers and recreational pilots, the Matrix FC features a robust 1mm board for enhanced durability, a solder-free design for easy installation, and a beginner-friendly experience. For advanced pilots, the ultra-thin and lightweight Air FC is the definitive choice, engineered with race-winning agility to push the boundaries of FPV flight performance.
● Flight controllers are covered for manufacturer defects. Issues arising from user errors, physical crash damage, damage during installation or dismantling, modifications, power surges, electrical fires, or water exposure are not covered.
Bullet Points
● Dual DNA: 3IN1 (FC, ESC, and ELRS 2.4G RX) for DJI O4 digital dominance (omits analog OSD), 4IN1 for analog mastery with OSD.
● STM32G473 MCU: 55% faster processing than F411 for responsive tuning.
● Stable Video Transmission: Features a newly developed BEC to ensure consistent power delivery for seamless HD performance.
● Enhanced Overcurrent Capacity: Supports 12A continuous current and 18A peak ESC, providing robust performance for demanding flights.
● Reliable Precision: Includes an independent 3.3V LDO design to deliver stable, interference-free power directly to the IMU for accurate control.
● Whoop-ready Installation: The 3IN1 is equipped with motor plugs and a SH1.0-6Pin HD digital port for a hassle-free installation and maintenance experience, while the 4IN1 has external VTX soldering pads for protocol flexibility.
How to Use Serial Ports, Intergrated RX and VTX
UART3 is connected to the built-in serial ELRS RX. To release UART3, please remove the resistor. Additionally, this FC reserves 2 complete full-featured serial ports that can be used for external serial receivers, GPS, HD VTX, or other serial devices. You can refer to the picture below.
Installed on my tiny whoop, setup was easier than expected. Flies stable indoors. Mepsking support replied fast when I had a question.
Style：4 In1
E***********s
Verified
Good option for lightweight builds. Easy to install and no issues during setup. Stable hover and smooth control.
Style：3 In 1
Purchased 5 times
Additional reviews after 10
days
After several sessions, everything still works fine. Solid entry-level board.
F**********r
Verified
Good balance between simplicity and performance. Ideal for lightweight indoor builds.
Style：4 In1
Additional reviews after 12
days
After more flights, still stable and consistent.
D***********s
Verified
Using on a 1S indoor build, very clean layout and easy wiring. Good response for beginner practice.
Style：3 In 1
Purchased 2 times
Additional reviews after 11
days
Still flying daily indoors, no stability issues so far.
A********g
Verified
Good board for simple builds. Everything connected without issues and flew stable right away.
Style：4 In1
Additional reviews after 12
days
Still working fine after more packs.
K*********h
Verified
Installed the 3in1 version on a small whoop build. Soldering was easy and everything worked out of the box. Flight feels stable indoors.
Style：3 In 1
Additional reviews after 40
days
After more packs, still running smooth with no issues. Good for simple builds.
N******m
Verified
Installed on a 1S freestyle build, surprisingly stable and responsive. Good performance for the size.
Style：4 In1
Additional reviews after 12
days
Still impressed after multiple flights.
O************t
Verified
Very compact board, perfect for lightweight builds. Everything worked fine during setup.
Style：4 In1
Additional reviews after 11
days
Still performing well, no issues.
1
2
3
4
FAQFeel free to ask us any questions
Q: Who is this BETAFPV Matrix 1S flight controller best for?
A: Ideal for Tiny Whoop and 1S micro FPV builds, perfect for beginners and indoor pilots looking for a lightweight, all-in-one solution.
Q: Is this flight controller beginner-friendly?
A: Yes. The 4IN1 AIO design simplifies wiring and installation, making it much easier for beginners compared to separate ESC setups.
Q: What’s the difference between 3IN1 and 4IN1 versions?
A: The 4IN1 version integrates all four ESC channels into one board for a cleaner, simpler build, while the 3IN1 version offers an alternative layout for specific setups.
Q: What flight performance can I expect?
A: Smooth and stable flight performance optimized for 1S whoops, with responsive control ideal for indoor flying and light freestyle.
Q: What drones is it compatible with?
A: Designed for 1S Tiny Whoop and micro FPV drones, compatible with most lightweight frames using standard mounting patterns.
BETAFPV 0702 Brushless Motors (2026) for 65mm FPV Whoop 1SChampion 36000KV$48.49 Save $1.50
Verified
