T-MOTOR V60A 24S BLDC FOC Multicopter-/UAV-Regler
T-Motor V60A 24S BLDC FOC Multirotor UAV ESC (DroneCAN + PWM, Advanced V-Series)
Short description: The T-Motor V60A 24S is a high-voltage FOC-vector brushless speed controller from the V-Series Advanced line, built for 12–24S (max 105 V) professional multirotor UAVs. It runs 35 A continuous and 65 A peak (<10 s) with sinusoidal commutation for 300 ms throttle response, efficient energy transfer, and low-noise operation versus traditional PWM ESCs. Throttle accepts DroneCAN (TM_UAVCAN_V2.3) or isolated 5 V/3.3 V PWM (50–500 Hz, 1040–1940 µs) as redundant inputs, with electronic prop braking and firmware upgrade over CAN. The enclosure is IP55 (IP67 on request), 115×57×26.5 mm, 180 g without wire / 283.5 g with wire, no BEC, standby ≤50 mA@100 V. I/O: 14AWG 1200 mm power in (red/black), 14AWG 250 mm motor out (orange), shielded 5C 330 mm signal (JP-3P×2), shielded 24AWG 5C 370 mm encoder (M6 aviation).
Recommended combo: U13 II KV65 + G32 prop on 24S.
Key specs line: 12–24S (max 105 V) | 35 A cont. / 65 A peak <10 s | FOC sinusoidal | DroneCAN + isolated PWM 50–500 Hz | No BEC | IP55 (IP67 opt.) | 283.5 g | 115×57×26.5 mm.
- Kostenloser Versand | Für Bestellungen über 99 $
- 2 Jahre Garantie | Sorglose 48-monatige Garantie
- Einfache Rückgabe und Umtausch | Rückgabe innerhalb von 15 Tagen
- Professioneller Support | 24-Stunden-Reaktion
- Runs on 12–24S LiPo (max 105 V), 35 A sustained and 65 A burst (<10 s), sinusoidal BLDC commutation for fast 300 ms throttle response and lower acoustic noise than square-wave ESCs.
- Native TM_UAVCAN_V2.3 bus for PX4/ArduPilot plus backup isolated 5 V/3.3 V PWM (50–500 Hz, 1040–1940 µs); fully signal-isolated for noise immunity in dense avionics bays.
- Supports active fixed-pitch braking via CAN+PWM, shielded JP-3P signal cable (330 mm) + M6 aviation encoder cable (370 mm) for closed-loop RPM/current feedback.
