Q: What setups are recommended for this receiver?

A: The BETAFPV ExpressLRS Lite Receiver is recommended for use with ELRS protocol transmitters or high-frequency modules, SZ F7 HD/SZ F7/SZ F7 MINI flight controllers, SZ 60A 4in1 FPV ESC, and frames sized 1 inch or above.

Q: What are the features of this receiver?

A: The BETAFPV ExpressLRS Lite Receiver features an ultra-lightweight design and a 2.4GHz flat SMD ceramic antenna, reducing the aircraft's weight. With a size of only 3mm and a weight of 0.53g, it offers fast transmission. It is compatible with most transmitters and ELRS high-frequency modules, providing long-range signal transmission capabilities.

Q: What protocol is required for using this receiver?

A: The BETAFPV ExpressLRS Lite Receiver uses the Serial-based receiver protocol, specifically the CRSF protocol. Ensure the corresponding mapping channels are activated in the ground station during usage.

Q: What precautions should be taken when using this receiver?

A: During installation, ensure proper insulation and waterproofing to prevent short circuits. Connect the receiver's RX to the flight controller's FC TX port and the receiver's TX to the flight controller's FC RX port, supporting a 5V voltage output. After binding, open the corresponding mapping channels in the ground station to prevent compatibility issues with the flight controller.

BETAFPV ExpressLRS Lite Receiver Flat Antenna Tower Antenna for 65/75/85mm FPV Racing Whoop

About BETAFPV ExpressLRS Lite FPV Receiver:

The BETAFPV ELRS Lite FPV receiver uses the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS is designed to provide great performance in speed, latency, and range. It stands out as one of the fastest RC links available while also delivering long-range capabilities.

Tower Antenna or Flat Antenna

New lite FPV receiver with a flat antenna features a 3mm extra-thin board and 0.53g lightweight, which requires less assembly space on drones with limited space. Besides, solid flat antenna without irregular parts can withstand crashes, making the receiver not so fragile.

BETAFPV

4.9

Verkäufe：86Stück

$8.99

~~$15.99~~

-44%

● 2.4GHz planar SMD ceramic antenna, durable and impact resistant.

● 0.53 grams, 3mm extra-thin board, compact and lightweight to save space.

● ExpressLRS technology for fast, long range.

● Designed for ELRS TX modules.

● V1.1.0 protocol, easy to bind with three power cycles.

Mehr erfahren

Optionen (1)

ELRS 2.4G / Flat Antenna V1.1

Menge

Auf Lager Erwartete Lieferung within 5 days nach Bestellung.

Kostenloser Versand | Für Bestellungen über 99 $

2 Jahre Garantie | Sorglose 24-monatige Garantie

Einfache Rückgabe und Umtausch | Rückgabe innerhalb von 30 Tagen

Professioneller Support | 24-Stunden-Reaktion

Zahlung | Jede Bestellung, die Sie bei uns aufgeben, ist sicher & geschützt

Kopieren

Bewertungen (14)

A*****s
Mal gekauft
kudos to Mepsking for the smooth process! The packaging was professional with anti-static foam, and the receiver itself is incredibly lightweight yet feels durable. Installation took less than 10 minutes thanks to the clear pinout diagram; Already bought a second one to gift to my brother-in-law,
Version：ELRS 2.4GAntenna：Tower Antenna
H**o

zero crosstalk at 100Hz refresh rate. The IP55-rated casing shrugged off rain during a forest shoot. Shipping included DDP – no surprise fees. Gifted units to trainers in Spain.
Version：ELRS 2.4GAntenna：Flat Antenna V1.1
B******t
Mal gekauft
As an FPV racer, I’ve tested multiple receivers, but BETAFPV’s ELRS Lite stands out for its rock-solid 2.4GHz stability. Purchased two from Mepsking during their flash sale (great discount!), and both arrived in sealed ESD bags.
Version：ELRS 2.4GAntenna：Flat Antenna V1.1

BETAFPV ExpressLRS Lite Receiver Flat Antenna Tower Antenna for 65/75/85mm FPV Racing Whoop

About BETAFPV ExpressLRS Lite FPV Receiver:

2.4GHz flat SMD ceramic antenna,impact resistant

0.53 grams, 3mm extra-thin board,greatly saves space.

V1.1.0 protocol, no binding phrases, easy to operate and fixed

Configuration & Bind

Diagram

Package Included